Vulcan Residential Line

The eco-friendly anti-scale system for private houses and villas

Residential Application Areas:

Houses, Apartments,
Bungalows, Swimming Pools,
Jacuzzis, Small Machinery,
Irrigation Systems, Garden Sprinklers,
Drinking Water& many more …

Water is a valuable resource. However, hard water contains dissolved scale which will eventually build deposits in your pipes and appliances. Every house owner should use an eco-friendly water treatment system in order to ensure their home is protected against scale and rust. This preserves the value of your home today and for the next generation to come.

Vulcan is maintenance-free and does not change the water composition. It leaves calcium and magnesium in the water which are important minerals for the body. The Vulcan Residential Line units have been designed to protect the piping system in private houses, small swimming pools and small equipment.

Houses & Buildings: The piping system, water heaters, washing machines and other appliances are protected.

Water Heaters & Heat Exchangers: Vulcan controls scale build-up in water heaters in your home and reduces their maintenance.

Pools & Jacuzzis: Vulcan protects the equipment and pipes against harmful deposits. You can cut down on chlorine use and many other additives.

Solar water heater: Vulcan reduces scale build-up in collectors, it protects hot water tanks and vacuum tubes, and keeps the system from over-heating.

RESIDENTIAL LINE | Vulcan 3000

Vulcan Anti-Scale System for residential use and small equipment

Weight: 2kg

Pipe Diameter: 13-38mm ( 1/2″-1 1/2″)

Max.capacity: 3000l/h (13gpm)

Voltage: 36V

Wattage: 2.0 watts

Impulse bands: 2x1m (2×39″)

Band width: 10mm (0.4″)

Dimensions: 125/80/30mm (5.9/3.5/1.2″)

Frequency Range: 3 -32 kHz

Required space: approx. 350mm (14″)

Programs: 1

RESIDENTIAL LINE | Vulcan 5000

Vulcan Anti-Scale System for residential use and small equipment

Weight: 2kg

Pipe Diameter: 13-50mm ( 1/2″-2″)

Max.capacity: 8000l/h (35gpm)

Voltage: 36V

Wattage: 2.0 watts

Impulse bands: 2x2m (2×79″)

Band width: 10mm (0.4″)

Dimensions: 150/90/30mm (5.9/3.5/1.2″)

Frequency Range: 3 -32 kHz

Required space: approx. 350mm (14″)

Programs: 1